Durability: | <0.3dB Typical Change, 200 Matings | Interchangeability: | ≤0.2dB |
---|---|---|---|
Tensile Strength: | >70N | Plug -in Times: | ≤ 500 |
Operating Temperature (℃): | -40 To + 85°C |
Zion Code | Zion Description | |||||||||||||||||||||||||||||||||||||||||||
ZCM1127HLA1X | MPO Female To MPO Female OM3 3.0mm LSZH 12 Fibers MPO Patch Cord Custom Meters | |||||||||||||||||||||||||||||||||||||||||||
|
Connectors’ Industrial Standard:
Connector | Reference | Housing Details | ||||||
MPO Singlemode | IEC 61754-7 | SM APC: Green connectors+black boot (Standard Loss MPO) SM APC: Yellow connectors+black boot (Super low loss MPO) |
||||||
MPO Multimode | IEC 61754-7 |
OM1&OM2 PC: Beige connectors+black boot (Standard Loss MPO) |
Meets IEC Standard IEC-61754-7; IEC61755, Telcordia GR-1435-CORE, JIS C5982; TIA-604-5(FOCIS5) compliant Structured cabling per TIA-568-C | ||||||||
10G Fiber Channel Compliant | ||||||||
40G and 100G IEEE 802.3 |
Optical Specifications:
Spec items. | Single mode (APC 8-degree polished) | Multimode (PC Flat polish) | ||||||
nsertion loss (MPO) (IEC 61300-3-34) |
Standard loss:≤0.75dB(max), ≤0.50dB(Typical) Super Low loss:≤0.35dB(max), ≤0.20dB(Typical) |
Standard loss:≤0.6dB(max), ≤0.50(Typical) Super Low loss:≤0.35dB(max) , ≤0.20dB(Typical) |
||||||
Insertion loss (LC/SC/FC/ST) (IEC 61300-3-6) |
≤0.3dB | ≤0.3dB | ||||||
Return loss(MPO) | ≥60dB(8degree polishing) | ≥25dB | ||||||
Return loss(LC/SC/FC/ST) | APC≥60dB; UPC≥50dB | ≥35dB | ||||||
Durability | <0.3dBtypical change, 200 matings | |||||||
Interchangeability | ≤0.2dB | |||||||
Tensile strength | >70N | |||||||
Plug -in times | ≤500 | |||||||
Operating Temperature (℃) | ·-40 to + 85°C |
Features: | ||||||||
Low insertion loss, high return loss | ||||||||
MT based Multi-fiber Connector, 4,8,12 and 24 fiber connector terminations and assemblies | ||||||||
Economical solution for mass-termination of fiber | ||||||||
Designed for low loss and standard loss SM and MM applications | ||||||||
Ruggedized round cable, oval cable and bare ribbon options available | ||||||||
Color coded housings available to differentiate fiber type, polish type and/or connector grade | ||||||||
Good in repeatability and exchangeability |
Application: | ||||||||||||||||||||||||||||||||||||||||||||
|
Naming Rules&Order Confirmation Information:
Push Pull Tab For Senko MPO
MPO-MPO 12F Fiber Patch Cord drawing.
Overall Length(L)(m) | length of tolerance(cm) | |||||||
0<L<1 | +5/-0 | |||||||
1<L<10 | +10/-0 | |||||||
10<L<40 | +15/-0 | |||||||
40<L | ‘+0.5% x L/-0 |
Three Connection Methods Help Keep the Right MTP/MPO Polarity
1. Polarity A connection
Polarity A MPO cables use a key up, key down design. Therefore, as shown in the figure below, the position 1 of one connector is corresponding to the position 1 of another connector. There is no polarity flip. Therefore, when we use polarity A MTP cable for connection, we must use A-B duplex patch cables on one end and A-A duplex patch cables on the other end. Since in this link, Rx1 must connect to Tx1. If we don’t use A-A duplex patch cable, according to the design principle of polarity A MTP cable, fiber 1 may transmit to fiber 1, that is to say Rx1 may transmit to Rx1, which may cause errors. |
2. Polarity B connection
Polarity B MTP cables use a key up, key up design. Therefore, as shown in the figure below, the position 1 of one connector is corresponding to the position 12 of another connector. Therefore, when we use polarity B MTP cable for connection, we should use a A-B duplex patch cables on both ends. Since the key up to key up design help to flip the polarity, which makes fiber 1 transmit to fiber 12, that is the Rx1 transmits to Tx1. |
3. Polarity C connection
Like the polarity A MPO cables, polarity C MPO cables also use a key up, key down design. However, within in the cable, there is a fiber cross design, which makes the position 1 of one connector is corresponding to the position 2 of another connector. As shown in the figure below, when we use polarity C MTP cable for connection, we should use a A-B duplex patch cables on both ends. Since the cross fiber design help to flip the polarity, which makes fiber 1 transmit to fiber 2, that is the Rx1 transmits to Tx1. |
Note: The Polarity type is in the following naming rules-Polarity A;Polarity B;Polarity C
Zion Communication's Hot TRUNK CABLE
Zion Code | Zion Description | |||||||
7236001 | ZCM1122HIA1X | MPO Female To MPO Female SM 3.0mm LSZH 12 Fibers MPO Patch Cord Custom Meters | ||||||
7236002 | ZCM1152HIA1X | MPO Female To MPO Female SM 3.0mm LSZH 24 Fibers MPO Patch Cord Custom Meters | ||||||
7236003 | ZCM1127HLA1X | MPO Female To MPO Female OM3 3.0mm LSZH 12 Fibers MPO Patch Cord Custom Meters | ||||||
7236004 | ZCM1157HLA1X | MPO Female To MPO Female OM3 3.0mm LSZH 24 Fibers MPO Patch Cord Custom Meters | ||||||
7236005 | ZCM1128HMA1X | MPO Female To MPO Female OM4 3.0mm LSZH 12 Fibers MPO Patch Cord Custom Meters | ||||||
7236006 | ZCM1158HMA1X | MPO Female To MPO Female OM4 3.0mm LSZH 24 Fibers MPO Patch Cord Custom Meters | ||||||
7236007 | ZCM2122HIA1X | MTP Female To MTP Female SM 3.0mm LSZH 12 Fibers MTP Patch Cord Custom Meters | ||||||
7236008 | ZCM2152HIA1X | MTP Female To MTP Female SM 3.0mm LSZH 24 Fibers MTP Patch Cord Custom Meters | ||||||
7236009 | ZCM2127HLA1X | MTP Female To MTP Female OM3 3.0mm LSZH 12 Fibers MTP Patch Cord Custom Meters | ||||||
7236010 | ZCM2157HLA1X | MTP Female To MTP Female OM3 3.0mm LSZH 24 Fibers MTP Patch Cord Custom Meters | ||||||
7236011 | ZCM2128HMA1X | MTP Female To MTP Female OM4 3.0mm LSZH 12 Fibers MTP Patch Cord Custom Meters | ||||||
7236012 | ZCM2158HMA1X | MTP Female To MTP Female OM4 3.0mm LSZH 24 Fibers MTP Patch Cord Custom Meters |
Packaging
This easily taken and well-protected fiber optical cable package has been labelled and marked by OMC as default .Standard carton size : 34*22*15 cm; 44*34*24 cm ; 54*39*34 cm . Which carton to be used depends on goods Qty . Packing can be customized. | ||||||||
OEM/ODM service for you
1. Cable color, printing word, material of cable jacket, connector’s color | ||||||||
2. OEM Label, Identify ring, cable’s label,box, shipping marks | ||||||||
3. Different quality Level. |
Cabling Infrastructure